Micron Pleated Cartridge
Large filtration area for fine particle removal, polishing and downstream equipment protection.
MP
Final Filtration & Downstream Equipment Protection
Precision Safety Filter Housing for 1 to 200 Cartridges
Incefiltration precision safety filter housings provide a final barrier before membranes, pumps, nozzles, heat exchangers, filling equipment and other sensitive downstream components. The stainless steel housing supports multiple cartridge types and 1 to 200 elements, combining fine filtration, large flow, low product loss, simple maintenance and flexible material selection.
Verified Product Data
Cartridge Quantity1 to 200 pieces, customization supported
Compatible ElementsPleated, string wound, activated carbon and melt blown
Pressure / Temperature1.0 MPa · Up to 130°C
Material304 stainless steel / 316L stainless steel
Precision Safety Filter Housing Features
The following features are organized from the supplied Incefiltration product sheet.
High-Precision Filtration
Compatible high-efficiency filter cartridges provide fine particle retention for a wide range of liquids.
Low Product Loss
Large flow and high precision reduce unnecessary consumable use and retained process liquid.
Easy Operation
A straightforward vessel, quick-opening cover and replaceable cartridges simplify routine maintenance.
Flexible Stainless Steel Selection
304 and 316L stainless steel options support many industrial liquid-filtration scenarios.
Final Protection Stage
Installed before membranes, pumps, spray nozzles or other sensitive downstream equipment.
Multiple Cartridge Media
One housing family can be configured for several commonly used cartridge technologies.
Scalable Cartridge Quantity
From compact units to large centralized systems with up to 200 cartridge positions.
Product Structure & Introduction
The reference vessel uses a rocker handwheel, davit arm, thickened top cover, quick-open lifting rings, reinforced cylinder, side inlet/outlet ports and widened support legs.
Rocker Handwheel & Thickened CoverSupports cover lifting, movement and secure closure
Liquid InletSide process connection for incoming liquid
Thickened Cylinder Body304 or 316L stainless steel vessel
Liquid OutletFiltered-liquid discharge connection
Verified Material & Configuration Data
Material304 stainless steel / 316L stainless steel
Cartridge Quantity1–200 pieces; customization supported
Design Pressure1.0 MPa
Operating TemperatureUp to 130°C
Surface FinishMechanical polishing / sandblasting
Inlet / Outlet ConnectionTri-clamp / flange / thread
Seal GasketSilicone / Viton-FKM / PTFE / EPDM
Typical ApplicationsPetrochemical, fine chemical, pharmaceutical, electric power, papermaking, water treatment, automotive, mechanical processing, coatings, electronics and other industries
Perforated Adapter Plate
Custom hole patterns support the required cartridge quantity and cartridge interface.
Quick-Open Cover Hardware
Eye bolts, lifting rings and the rocker mechanism simplify access to the internal cartridge assembly.
Drain and Cleaning Access
Lower connections support vessel draining, cleaning and scheduled maintenance.
Compatible Filter Cartridge Types
The supplied sheet shows that the housing can be matched with multiple cartridge models.
String Wound Cartridge
Depth-filtration element for dirt loading, coarse-to-fine particle capture and process pretreatment.
SActivated Carbon Cartridge
Adsorptive cartridge option for compatible odor, color, chlorine and organic-removal applications.
AMelt Blown Cartridge
Economical polypropylene depth cartridge for suspended-solids removal and general pre-filtration.
P
The image specification defines MC as the multi-core filter housing family and identifies
MP, S, A and P cartridge codes. Final compatibility depends on cartridge length, outside diameter,
end adapter, gasket and internal mounting plate.
Cartridge Quantity & Length Options
The product sheet lists 1–200 cartridges and 10, 20, 30, 40 and 50-inch cartridge lengths.
10"Cartridge Length
20"Cartridge Length
30"Cartridge Length
40"Cartridge Length
50"Cartridge Length
1–10 Cartridges
Compact final-protection housings for point-of-use and lower-flow filtration.
11–50 Cartridges
Medium-flow cartridge systems for production-line and membrane protection.
51–110 Cartridges
Large filter vessels for centralized high-area security filtration.
111–200 Cartridges
Custom large-diameter vessels for major industrial liquid streams.
Construction Detail Images
Three image positions are reserved for the adapter plate, lower vessel details and upper closure shown in the supplied sheet.
Multi-Cartridge Adapter Plate
Replace with the real image showing the perforated cartridge plate and perimeter seal.
Lower Vessel, Drain & Supports
Replace with a close-up of the drain connection, support legs, welds and process nozzles.
Cover, Eye Bolts & Rocker Mechanism
Replace with the upper cover hardware, lifting rings and davit assembly.
Precision Safety Filter Housing Parameters
The following 16 models and reference values are organized from the supplied Incefiltration parameter table.
| Cartridge Quantity | Device Model | Barrel Diameter | Inlet / Outlet | Structure | Wall Thickness |
|---|---|---|---|---|---|
| 1–5 Cartridges | INCE-MC-P-05 | Ø219 mm | DN50 Flange | Dome / Legs | 3.0 mm |
| 6–7 Cartridges | INCE-MC-P-07 | Ø219 mm | DN50 Flange | Dome / Legs | 3.0 mm |
| 8–10 Cartridges | INCE-MC-P-8-10 | Ø300 mm | DN50 Flange | Dome / Legs | 3.0 mm |
| 11–16 Cartridges | INCE-MC-P-11-16 | Ø350 mm | DN65 Flange | Dome / Legs | 3.0 mm |
| 17–20 Cartridges | INCE-MC-P-17-20 | Ø400 mm | DN80 Flange | Rocker | 3.0 mm |
| 21–25 Cartridges | INCE-MC-P-21-25 | Ø450 mm | DN80 Flange | Rocker | 3.0 mm |
| 26–33 Cartridges | INCE-MC-P-26-33 | Ø500 mm | DN100 Flange | Rocker | 3.0 mm |
| 34–40 Cartridges | INCE-MC-P-34-40 | Ø550 mm | DN100 Flange | Rocker | 3.0 mm |
| 41–50 Cartridges | INCE-MC-P-41-50 | Ø600 mm | DN125 Flange | Rocker | 3.0 mm |
| 51–65 Cartridges | INCE-MC-P-51-65 | Ø700 mm | DN150 Flange | Rocker | 3.0 mm |
| 66–80 Cartridges | INCE-MC-P-66-80 | Ø800 mm | DN150 Flange | Rocker | 3.0 mm |
| 81–85 Cartridges | INCE-MC-P-81-85 | Ø850 mm | DN200 Flange | Rocker | 4.0 mm |
| 86–110 Cartridges | INCE-MC-P-86-110 | Ø900 mm | DN200 Flange | Rocker | 4.0 mm |
| 111–130 Cartridges | INCE-MC-P-111-130 | Ø1000 mm | DN250 Flange | Rocker | 4.0 mm |
| 131–160 Cartridges | INCE-MC-P-131-160 | Ø1100 mm | DN250 Flange | Rocker | 4.0 mm |
| 161–200 Cartridges | INCE-MC-P-161-200 | Ø1200 mm | DN250 Flange | Rocker | 4.0 mm |
Cartridge quantity ranges are interpreted from the device model codes and the supplied
statement that 1–200 cartridges are supported. Final quantity, internal plate, vessel diameter,
nozzle size, structure and wall thickness must be confirmed by the approved production drawing.
Dome / Legs and Rocker Structures
The parameter table separates smaller and larger housings by closure and support arrangement.
Dome / Legs Structure
Applied to smaller INCE-MC-P reference models from INCE-MC-P-05 through INCE-MC-P-11-16.
Ø219–Ø350 mm
DN50–DN65
3.0 mm Wall
Rocker Structure
Applied to larger INCE-MC-P-17-20 through INCE-MC-P-161-200 reference models.
Ø400–Ø1200 mm
DN80–DN250
3.0 / 4.0 mm Wall
Custom Internal Configuration
The adapter plate can be designed for different cartridge media, lengths, quantities and mounting interfaces.
1–200 Cartridges
Multiple Media
Custom Drawing
Materials, Connections & Seal Options
Configure the housing according to process compatibility, cleanliness and installation requirements.
Housing Materials
Select the vessel grade according to the working liquid and corrosion requirements.
304 Stainless Steel
316L Stainless Steel
Pipe Connections
Available process connection forms listed in the supplied introduction.
Tri-Clamp
Flange
Thread
Seal Gaskets
Select the gasket according to liquid compatibility and operating temperature.
Silicone
Viton / FKM
PTFE
EPDM
Surface Finish
Choose the finish according to cleaning, corrosion and appearance requirements.
Mechanical Polishing
Industrial Polishing
Internal Polishing
External Sandblasting
Dimension Reference Diagrams
The supplied drawing uses a 40-inch, 25-cartridge housing as an example. Final dimensions vary with cartridge quantity, length, connection and structure.
Twenty-Five-Cartridge Top View
The example top view shows multiple cartridge positions around a central support and side process nozzles.
Side Elevation Reference
The supplied example indicates approximately 1920 mm overall height, a Ø450 × 3 mm body, about 1510 mm upper vessel height, 750 mm nozzle reference height, 400 mm lower section and 740 mm base width.
Front Elevation Reference
The front view shows the domed cover, quick-opening fasteners, rocker mechanism, pressure accessories, process nozzle and support-leg arrangement.
These dimensions are approximate reference readings from the 40-inch, 25-cartridge example.
Custom fabrication is supported. The final approved production drawing controls all dimensions.
Typical Precision Safety Filter Housing Applications
Precision safety housings provide a final protective filtration barrier in demanding industrial systems.
RO & Membrane Protection
Final cartridge filtration before reverse-osmosis and membrane systems.
Petrochemical
Protection of pumps, nozzles, instruments and downstream process equipment.
Fine Chemicals
Final particle removal from compatible acids, alkalis, solvents and specialty chemicals.
Pharmaceutical Chemicals
Pre-final filtration and polishing with suitable materials, finishes and cleaning procedures.
Electric Power
Condensate, cooling water, utility water and equipment-protection filtration.
Food & Filling Lines
Protection of filling valves, spray devices and compatible production equipment.
Coatings & Automotive
Final filtration before coating, painting, spraying and precision application systems.
Electronics
Final particle control for compatible process water and process chemicals.
How to Select a Precision Safety Filter Housing
The safety filter must match the downstream protection target and cartridge technology.
Define the Protection Target
Identify the membrane, pump, nozzle, instrument or production equipment requiring protection.
Select Cartridge Media
Choose pleated, string wound, activated carbon or melt blown media based on the filtration duty.
Calculate Quantity & Length
Determine cartridge count and 10–50 inch length from flow, clean pressure drop and service-life target.
Confirm Housing Configuration
Select material, connection, pressure, temperature, structure, seal, finish, drain and installation access.
Need a Custom Precision Safety Filter Housing?
Send the protected equipment, cartridge type, flow, pressure, temperature, liquid and installation drawing.
Precision Safety Filter Housing FAQ
Common questions before selecting an Incefiltration security filter housing.
What is a precision safety filter housing?
It is a cartridge filter vessel used as a final protective stage before membranes, pumps, nozzles, filling systems or other sensitive equipment.
Which cartridge types are compatible?
The supplied sheet identifies micron pleated, string wound, activated carbon and melt blown filter cartridges.
How many cartridges can the housing hold?
The product introduction states 1 to 200 cartridges with customization supported.
What cartridge lengths are available?
The specification block lists 10, 20, 30, 40 and 50-inch filter cartridges.
What are the operating limits?
The supplied sheet lists 1.0 MPa design pressure and operating temperature up to 130°C. Final project conditions require engineering confirmation.
Can the adapter plate and vessel dimensions be customized?
Yes. Cartridge quantity, hole pattern, mounting interface, vessel diameter, wall thickness, nozzle size, cover structure and support arrangement can be customized after drawing approval.
Request a Precision Safety Filter Housing Quote
Complete the cartridge and process information below for an accurate engineering proposal.