Incefiltration manufactures non-metallic bag filter housings for corrosive acids, alkalis and compatible process liquids. The one-piece injection-molded vessel eliminates welded body seams, while the arched sealing structure, FKM O-rings and multiple cover options support reliable industrial filtration.
The product features below are based on the supplied Incefiltration product sheet.
The housing body is molded as one piece without welded vessel seams, helping reduce side-leakage risk.
PPH and PVDF material options support compatible acidic, alkaline and corrosive liquid applications.
The arched structure presses the filter basket against the sealing ring to improve sealing between the basket and housing.
Rotating-bolt, screw-top and lifting-ring cover styles simplify installation and filter bag replacement.
Selected molded polymer construction supports compatible long-term industrial service.
Reference O-rings are listed as FKM for the vessel, basket, inlet and outlet.
A micro-switch-type protection switch can be added to the model configuration.
The housing combines a molded body, removable basket, pressure ring, FKM seals, process connections and configurable cover accessories.
Choose a plugged connection, pressure-gauge connector or exhaust-valve assembly.
The removable molded basket supports the bag and simplifies maintenance.
Material, cover, joint and safety-switch options are combined in the model code.
PPH and PVDF versions serve different chemical, temperature and project requirements.
PPH is the material used in the supplied reference parameter and component tables.
PVDF is included in the supplied material coding for applications requiring an alternative fluoropolymer construction.
The supplied coding system combines company, housing type, bag size, cover, material, joint and safety-switch options.
INCE: company identifier
F: one-piece filter housing
Add real product photographs for the main cover and connection variants.
Use a real image of the standard screw-top cover and molded process connections.
Use a real image showing the lifting-ring gland and pressure-gauge assembly.
Use a real image showing union-type water inlet and outlet connections.
The seven models below reproduce the numerical values shown in the supplied parameter table.
| Model | Inlet / Outlet | Filter Bag | Filter Area | Housing Capacity / Weight (L / kg) | Maximum Flow | Operating Temperature | Maximum Pressure |
|---|---|---|---|---|---|---|---|
| INCE-1A-P | 50 × 50 mm | 180 × 430 mm | 0.25 m² | 20.3 / 15.3 | 20 m³/h | 90°C | 0.8 MPa |
| INCE-2A-P | 65 × 65 mm | 180 × 810 mm | 0.50 m² | 32 / 24.2 | 40 m³/h | 90°C | 0.8 MPa |
| INCE-2B-P | 65 × 65 mm | 180 × 810 mm | 0.50 m² | 32 / 24.2 | 40 m³/h | 90°C | 0.8 MPa |
| INCE-4A-P | 40 × 40 mm | 105 × 380 mm | 0.12 m² | 6.5 / 5.9* | 12 m³/h | 90°C | 0.8 MPa |
| INCE-4AX-P | 40 × 40 mm | 105 × 380 mm | 0.12 m² | 6.5 / 4.1* | 12 m³/h | 70°C | 0.8 MPa |
| INCE-5A-P | 50 × 50 mm | 150 × 510 mm | 0.30 m² | 2.8 / 10.8* | 22 m³/h | 90°C | 0.8 MPa |
| INCE-6A-P | 65 × 65 mm | 180 × 560 mm | 0.35 m² | 24 / 18 | 25 m³/h | 90°C | 0.8 MPa |
The supplied exploded parts table lists 13 components and material references.
| No. | Component | Main Material / Order Note |
|---|---|---|
| 1 | Pressure gauge | Confirm gauge range and specification when ordering |
| 2 | Pressure gauge joint | PP |
| 3 | O-ring | FKM |
| 4 | Upper cover | PPH |
| 5 | Inside cover | PPH |
| 6 | Bucket O-ring | FKM |
| 7 | Pressure ring | PPH |
| 8 | Basket O-ring | FKM |
| 9 | Filter basket | PPH |
| 10 | Filter body | PPH |
| 11 | Filter outlet O-ring | FKM |
| 12 | Filter inlet O-ring | FKM |
| 13 | Protection switch | Optional; confirm requirement when ordering |
Five image positions are reserved for the main drawing configurations shown in the supplied sheet.
| Drawing Model | A | B | C | D | E | F | G | T | IH | OH | H |
|---|---|---|---|---|---|---|---|---|---|---|---|
| INCE-F-1A | 200 | 255 | 394 | 470 | Ø229 | 2" | Ø19 | 55 | 520 | 140 | 784 |
| INCE-F-2A | 200 | 255 | 394 | 470 | Ø229 | 2-1/2" | Ø19 | 55 | 520 | 150 | 1184 |
| INCE-F-2B | 200 | 255 | 394 | — | Ø229 | 2-1/2" | Ø19 | 55 | 930 | 150 | 1172 |
| INCE-F-4A | 130 | 175 | 282 | 300 | Ø148 | 1-1/2" | Ø18 | 45 | 450 | 130 | 628 |
| INCE-F-4AX | 125 | 165 | 220 | 275 | Ø140 | 1-1/2" | Ø14 | 20 | 455 | 80 | 592 |
| INCE-F-5A | 156 | 206 | 324 | 396 | Ø180 | 2" | Ø18 | 55 | 605 | 135 | 818 |
| INCE-F-6A | 200 | 255 | 394 | 470 | Ø229 | 2-1/2" | Ø19 | 55 | 677 | 150 | 938 |
Non-metallic filter housings are selected where corrosion resistance and metal-free wetted construction are important.
Compatible acid and alkaline process liquids after chemical-compatibility review.
Plating baths, rinse water and compatible pretreatment chemicals.
Compatible process chemicals and water-treatment streams.
Fine chemical, specialty chemical and corrosive-liquid particle removal.
Chemical dosing, pretreatment, ion-exchange and membrane-system protection.
Cleaning, pickling and compatible finishing solutions.
Compatible chemical-process filtration where polymer construction is specified.
Compact chemical filtration with multiple filter bag sizes and connection options.
Material and configuration selection must begin with complete process information.
Provide every liquid component, concentration, pH, contaminants and cleaning chemical.
Choose the housing and wetted component materials according to corrosion and temperature.
Select the filter bag dimensions, screw or lifting-ring cover and connection arrangement.
Specify pressure gauge, exhaust valve, protection switch, seals and piping connections.
Send the complete liquid composition, temperature, pressure, flow, bag size and connection requirements.
Common questions before selecting a molded non-metallic bag filter housing.
The molded vessel body avoids welded body seams and can reduce potential leakage paths in compatible service.
PPH is an economical chemical-resistant polypropylene material, while PVDF is selected for applications requiring an alternative fluoropolymer compatibility profile. Final selection requires chemical and temperature review.
The supplied coding lists 180 × 430, 180 × 810, 105 × 380, 150 × 510 and 180 × 560 mm bags.
The coding includes an A screw-top cover, B lifting-ring gland and AX screw-top cover with union-type inlet and outlet.
Yes. The code includes plugged, pressure-gauge and exhaust-valve joint options, plus an optional K micro-switch protection device.
The supplied PPH table lists 0.8 MPa maximum pressure and model reference flows from 12 to 40 m³/h.
Not automatically. PVDF models require a separate confirmation of pressure, temperature, component materials and dimensional configuration.
Complete the chemical, bag and housing information below for an accurate proposal.