Internal Bag Openings
Replace with a real top-view photo showing multiple basket openings and the perimeter seal.
High-Flow Stainless Steel Bag Filtration
Multi Bag Filter Housing for 2 to 24 Filter Bags
Incefiltration manufactures multi bag filter housings for large-flow industrial liquid filtration. The series covers 2 to 24 filter bags with reference flows from 60 to 720 T/H. A davit-arm opening system, side inlet, bottom outlet, reinforced vessel body and corrosion-resistant stainless steel construction support reliable operation in petrochemical, chemical, pharmaceutical, power, papermaking, water treatment, automotive, coatings and electronics applications.
Verified Product Data
Material304 stainless steel / 316L stainless steel
Bag Quantity2 to 24 filter bags
Design / Temperature1.0 MPa · Operating temperature up to 130°C
Reference Flow60 to 720 T/H
Multi Bag Filter Housing Features
The following features are organized directly from the supplied Incefiltration product sheet.
2 to 24 Bag Design
A broad range of parallel filter bag quantities supports medium- and high-flow systems.
Davit-Arm Cover Opening
The davit arm and handwheel mechanism help open and move the heavy vessel cover quickly.
Stable Stainless Steel Construction
304 or 316L construction provides corrosion resistance for compatible industrial liquids.
Reliable High-Flow Operation
Parallel bags provide a large filtration area and a stable structure for high-flow systems.
Compact Vessel Design
The compact housing volume helps minimize retained liquid and product loss.
Side Inlet / Bottom Outlet
The flow arrangement supports drainage and more complete liquid discharge.
M16–24 Lifting Rings
High-strength lifting rings and multiple cover fasteners help maintain cover tightness.
Product Structure & Introduction
The multi bag housing combines a reinforced vessel, quick-opening cover, davit arm, rocker handwheel, filter baskets and bags, side inlet, bottom outlet and widened support legs.
Rocker Handwheel & Davit ArmSupports quick cover lifting and movement
Liquid InletSide-entry arrangement
Thickened Cylinder Body304 or 316L stainless steel pressure vessel
Liquid OutletBottom-side outlet for drainage and discharge
Verified Material & Configuration Data
Material304 stainless steel / 316L stainless steel
Design Pressure1.0 MPa
Operating TemperatureUp to 130°C
Surface FinishMechanical polishing / sandblasting
Entry TypeSide entry
Inlet / Outlet ConnectionTri-clamp / flange / thread
Seal GasketSilicone / Viton-FKM / PTFE / EPDM
Typical ApplicationsPetrochemical, fine chemical, pharmaceutical, electric power, papermaking, water treatment, automotive, mechanical processing, coatings, electronics and other industries
Filter Basket + Filter Bag
Each perforated basket supports one filter bag and maintains the filtration shape.
Quick-Open Lifting Rings
Multiple lifting rings and fasteners support secure cover sealing and maintenance.
Thickened Support Legs
Widened legs improve vessel stability and installation support.
Multi Bag Filter Housing by Bag Quantity
The supplied product series ranges from 2-bag to 24-bag housings.
2Bags
3Bags
4Bags
5Bags
6Bags
7Bags
8Bags
10Bags
12Bags
14Bags
16Bags
18Bags
20Bags
22Bags
24Bags
Construction Detail Images
Three image positions are reserved for the cover interior, lifting-ring hardware and davit-arm mechanism shown in the supplied sheet.
Cover Lifting Rings
Replace with a close-up of the high-strength lifting rings, fasteners and polished surface.
Davit Arm & Handwheel
Replace with a real image of the rocker handwheel and cover-opening mechanism.
Multi Bag Filter Housing Parameters
The following 15 models and reference values are taken from the supplied Incefiltration parameter table.
| Product Type | Device Model | Barrel Diameter | Inlet / Outlet | Reference Flow | Wall Thickness |
|---|---|---|---|---|---|
| 2-Bag | INCE-MB-02 | Ø400 mm | DN80 Flange | 60 T/H | 3.0 mm |
| 3-Bag | INCE-MB-03 | Ø450 mm | DN100 Flange | 90 T/H | 3.0 mm |
| 4-Bag | INCE-MB-04 | Ø500 mm | DN125 Flange | 120 T/H | 3.0 mm |
| 5-Bag | INCE-MB-05 | Ø550 mm | DN125 Flange | 150 T/H | 3.0 mm |
| 6-Bag | INCE-MB-06 | Ø600 mm | DN150 Flange | 180 T/H | 3.0 mm |
| 7-Bag | INCE-MB-07 | Ø700 mm | DN200 Flange | 210 T/H | 3.0 mm |
| 8-Bag | INCE-MB-08 | Ø800 mm | DN200 Flange | 240 T/H | 3.0 mm |
| 10-Bag | INCE-MB-10 | Ø900 mm | DN200 Flange | 300 T/H | 4.0 mm |
| 12-Bag | INCE-MB-12 | Ø950 mm | DN200 Flange | 360 T/H | 4.0 mm |
| 14-Bag | INCE-MB-14 | Ø1000 mm | DN200 Flange | 420 T/H | 4.0 mm |
| 16-Bag | INCE-MB-16 | Ø1100 mm | DN200 Flange | 480 T/H | 4.0 mm |
| 18-Bag | INCE-MB-18 | Ø1100 mm | DN200 Flange | 540 T/H | 4.0 mm |
| 20-Bag | INCE-MB-20 | Ø1200 mm | DN250 Flange | 600 T/H | 4.0 mm |
| 22-Bag | INCE-MB-22 | Ø1200 mm | DN250 Flange | 660 T/H | 4.0 mm |
| 24-Bag | INCE-MB-24 | Ø1300 mm | DN250 Flange | 720 T/H | 4.0 mm |
Reference flow values are shown as T/H in the supplied sheet. Actual capacity depends on
liquid density, viscosity, filter bag micron rating, solids loading, clean pressure drop,
pipe sizing and operating conditions. Final engineering confirmation is required.
Filter Bags, Connections & Seal Options
Configure the housing according to the liquid, filtration accuracy, piping standard and temperature.
Filter Bag Models
The specification block shows support for 1# through 5# filter bag models.
1# Bag2# Bag3# Bag4# Bag5# Bag
Housing Materials
Select stainless steel according to corrosion, hygiene and project requirements.
304 Stainless Steel316L Stainless Steel
Pipe Connections
Available connection forms listed in the supplied product introduction.
Tri-ClampFlangeThread
Seal Materials
Select the gasket based on chemical compatibility and temperature.
SiliconeViton / FKMPTFEEPDM
Dimension Reference Diagrams
The supplied drawing uses a 3-bag housing with 2# filter bags as an example. Final dimensions vary by bag count, connection and cover mechanism.
Top View Reference
Reference dimensions shown include a Ø450 mm vessel body, approximately Ø499 mm external cover envelope and a 169 mm reference dimension.
Front Elevation Reference
The example drawing shows Ø450 × 3 mm construction, approximately 1539 mm overall height, 1002 mm vessel/support height, 532 mm upper section and 470 mm leg section.
Internal Basket Reference
The section view shows a 3 mm vessel wall, approximately Ø171 mm bag basket diameter and 750 mm basket length for the example configuration.
These dimensions are reference readings from the 3-bag / 2# bag example in the supplied sheet.
Custom fabrication is supported. The final approved production drawing controls all dimensions.
Typical Multi Bag Filter Housing Applications
Multi bag housings provide high-flow particle removal across major industrial liquid processes.
Petrochemical
Large-flow filtration of compatible process liquids, oils and utility water.
Fine Chemicals
Particle removal from acids, alkalis, solvents, resins and specialty chemicals.
Pharmaceutical Chemicals
High-flow pre-filtration with suitable stainless steel, finish and gasket selections.
Electric Power
Cooling water, condensate, utility water and equipment-protection filtration.
Papermaking
White water, coating, additive and process-water filtration.
Water Treatment
Industrial water, RO pretreatment, cooling water and wastewater reuse.
Automotive & Coatings
Paint, coating, pretreatment and circulation-liquid filtration.
Electronics
Compatible high-flow process water and chemical filtration.
How to Select a Multi Bag Filter Housing
Bag quantity should be selected from real process flow and loading, not flow rate alone.
Confirm the Liquid
Provide composition, density, viscosity, temperature, solids content and corrosion conditions.
Define Flow & Pressure
Specify normal and peak flow, operating pressure, design pressure and allowable clean pressure drop.
Select Bag Quantity
Choose 2–24 bags based on required area, desired bag life, housing size and maintenance interval.
Confirm Connections & Access
Specify flange size, seal, surface finish, drain, vent, cover lifting space and installation drawing.
Need a Custom Multi Bag Filter Housing?
Send your flow, pressure, temperature, liquid, bag micron, connection size and installation drawing.
Multi Bag Filter Housing FAQ
Common questions before selecting an INCE-MB multi bag housing.
How many filter bags are available?
The supplied series includes 2, 3, 4, 5, 6, 7, 8, 10, 12, 14, 16, 18, 20, 22 and 24-bag configurations.
What is the reference flow range?
The table lists 60 T/H for INCE-MB-02 up to 720 T/H for INCE-MB-24. Actual flow must be recalculated for the working liquid and filter bag.
What materials and temperature are available?
The supplied sheet lists 304 and 316L stainless steel, design pressure of 1.0 MPa and operating temperature up to 130°C.
How is the cover opened?
A davit arm, rocker handwheel, lifting rings and multiple fasteners help lift, move and secure the heavy vessel cover.
Can dimensions and connections be customized?
Yes. Bag count, vessel diameter, wall thickness, inlet/outlet size, connection, height, support legs, surface finish and lifting system can be customized after drawing approval.
Request a Multi Bag Filter Housing Quote
Complete the process and configuration information below for an accurate engineering proposal.