Internal Cartridge Adapter Plate
Replace with a real top-view image showing cartridge holes, support rods and seals.
Fine Industrial Liquid Filtration
Micron Pleated Filter Housing for 1 to 200 Cartridges
Incefiltration manufactures micron pleated filter housings in 304 and 316L stainless steel for fine particle removal, liquid polishing and sanitary process filtration. The housing series supports 1 to 200 cartridges in 10, 20, 30, 40 and 50-inch lengths, with polished surfaces, quick-opening eye bolts, horizontal inlet and outlet connections, and customizable internal cartridge adapters.
Verified Product Data
Cartridge Quantity1 to 200 pieces, customization supported
Material304 stainless steel / 316L stainless steel
Pressure / Temperature1.0 MPa · Up to 130°C
Cartridge Length10", 20", 30", 40", 50"
Micron Pleated Filter Housing Features
The following product features are organized from the supplied Incefiltration product sheet.
Polished, Easy-Clean Surface
Polished stainless steel surfaces simplify cleaning, maintenance and visual inspection.
High Filtration Efficiency
Pleated cartridge systems provide a large filtration area and reduce the likelihood of rapid blockage.
High Process Flow
Multiple pleated cartridges provide high liquid-handling capacity for industrial filtration.
Wide Cartridge Compatibility
Internal adapter plates can be configured for a range of pleated and high-area cartridge designs.
Horizontal Inlet & Outlet
Horizontal process connections simplify piping layout and equipment installation.
Eye-Bolt Quick Opening
Multiple eye bolts help secure the cover and simplify disassembly for cartridge change-out.
Sanitary Process Applications
Suitable configurations can be applied where cleaning and sanitation requirements are strict.
Product Structure & Introduction
The reference housing uses a pressure gauge, thickened top cover and cylinder, side handles, quick-open lifting rings, horizontal inlet/outlet ports and support legs.
Pressure Gauge & Thickened CoverSupports pressure monitoring and stable closure
Thickened Cylinder Body304 or 316L stainless steel vessel
Side HandlesAssist movement, handling and maintenance
Horizontal Inlet / OutletConvenient piping and liquid flow path
Verified Material & Configuration Data
Material304 stainless steel / 316L stainless steel
Cartridge Quantity1–200 pieces; customization supported
Design Pressure1.0 MPa
Operating TemperatureUp to 130°C
Surface FinishMechanical polishing / sandblasting
Inlet / Outlet ConnectionTri-clamp / flange / thread
Seal GasketSilicone / Viton-FKM / PTFE / EPDM
Typical ApplicationsPetrochemical, fine chemical, pharmaceutical, electric power, papermaking, water treatment, automotive, mechanical processing, coatings, electronics and other industries
Cartridge Adapter Plate
Internal openings are arranged according to cartridge quantity and connection style.
Quick-Open Eye Bolts
Multiple eye bolts distribute sealing force around the lower cover connection.
Replaceable Cartridge Assembly
The housing can be disassembled for cartridge replacement, cleaning and inspection.
Cartridge Quantity & Length Options
The product sheet lists 1–200 cartridges and 10, 20, 30, 40 and 50-inch element lengths.
10"Cartridge Length
20"Cartridge Length
30"Cartridge Length
40"Cartridge Length
50"Cartridge Length
1–10 Cartridges
Compact housings for pilot, laboratory, low-flow and point-of-use filtration.
11–50 Cartridges
Medium-flow process filtration with larger total pleated area.
51–110 Cartridges
Large multi-cartridge vessels for high-flow industrial systems.
111–200 Cartridges
Custom large-diameter vessels for centralized filtration and major process streams.
Construction Detail Images
Three image positions are reserved for the internal adapter plate, inlet/outlet connection and eye-bolt closure shown in the supplied sheet.
Horizontal Inlet / Outlet
Replace with a close-up showing polished piping connections and weld quality.
Eye-Bolt Closure
Replace with a close-up showing lifting rings, clamps and the lower cover seal.
Micron Pleated Filter Housing Parameters
The following 16 models and reference values are taken from the supplied Incefiltration parameter table.
| Cartridge Quantity | Device Model | Barrel Diameter | Inlet / Outlet | Structure | Wall Thickness |
|---|---|---|---|---|---|
| 1–5 Cartridges | INCE-MP-05 | Ø219 mm | DN50 Flange | Dome / Legs | 3.0 mm |
| 6–7 Cartridges | INCE-MP-07 | Ø273 mm | DN50 Flange | Dome / Legs | 3.0 mm |
| 8–10 Cartridges | INCE-MP-8-10 | Ø300 mm | DN50 Flange | Dome / Legs | 3.0 mm |
| 11–16 Cartridges | INCE-MP-11-16 | Ø350 mm | DN65 Flange | Dome / Legs | 3.0 mm |
| 17–20 Cartridges | INCE-MP-17-20 | Ø400 mm | DN80 Flange | Rocker | 3.0 mm |
| 21–25 Cartridges | INCE-MP-21-25 | Ø450 mm | DN80 Flange | Rocker | 3.0 mm |
| 26–33 Cartridges | INCE-MP-26-33 | Ø500 mm | DN100 Flange | Rocker | 3.0 mm |
| 34–40 Cartridges | INCE-MP-34-40 | Ø550 mm | DN100 Flange | Rocker | 3.0 mm |
| 41–50 Cartridges | INCE-MP-41-50 | Ø600 mm | DN125 Flange | Rocker | 3.0 mm |
| 51–65 Cartridges | INCE-MP-51-65 | Ø700 mm | DN150 Flange | Rocker | 3.0 mm |
| 66–80 Cartridges | INCE-MP-66-80 | Ø800 mm | DN150 Flange | Rocker | 3.0 mm |
| 81–85 Cartridges | INCE-MP-81-85 | Ø850 mm | DN200 Flange | Rocker | 4.0 mm |
| 86–110 Cartridges | INCE-MP-86-110 | Ø900 mm | DN200 Flange | Rocker | 4.0 mm |
| 111–130 Cartridges | INCE-MP-111-130 | Ø1000 mm | DN250 Flange | Rocker | 4.0 mm |
| 131–160 Cartridges | INCE-MP-131-160 | Ø1100 mm | DN250 Flange | Rocker | 4.0 mm |
| 161–200 Cartridges | INCE-MP-161-200 | Ø1200 mm | DN250 Flange | Rocker | 4.0 mm |
Cartridge quantity ranges are interpreted from the model codes and the supplied statement
that 1–200 cartridges are supported. Final quantity, internal adapter plate, vessel diameter,
connection size and wall thickness must be confirmed by approved project drawings.
Dome / Legs and Rocker Structures
The parameter table identifies two structural classifications across the housing range.
Dome / Legs Structure
Used in the smaller INCE-MP-05 through INCE-MP-11-16 reference models.
Ø219–Ø350 mm
DN50–DN65
3.0 mm Wall
Rocker Structure
Used in the larger INCE-MP-17-20 through INCE-MP-161-200 reference models.
Ø400–Ø1200 mm
DN80–DN250
3.0 / 4.0 mm Wall
Custom Internal Arrangement
Cartridge hole pattern, support rods, seal interface and mounting hardware can be customized.
1–200 Cartridges
Custom Adapter
Custom Drawing
Materials, Connections & Seal Options
Configure the housing according to corrosion, hygiene, installation and operating temperature.
Housing Materials
Select stainless steel according to the process liquid and cleaning requirement.
304 Stainless Steel
316L Stainless Steel
Pipe Connections
Available connection forms listed in the supplied product introduction.
Tri-Clamp
Flange
Thread
Seal Gaskets
Select the seal according to chemical compatibility and temperature.
Silicone
Viton / FKM
PTFE
EPDM
Surface Finish
Choose the finish according to cleanliness, appearance and corrosion requirements.
Mechanical Polishing
Industrial Polishing
Internal Polishing
External Sandblasting
Dimension Reference Diagrams
The supplied drawing uses a 20-inch, three-cartridge housing as an example. Final dimensions vary with cartridge quantity, cartridge length and connection.
Top View Reference
The example shows a three-cartridge hole pattern, approximately Ø65 mm cartridge openings and an outer envelope around Ø320 mm.
Side Elevation Reference
The supplied example indicates an overall height of approximately 680 mm, a Ø204 mm reference body, a 500 mm cartridge section and lower support dimensions around 280 mm.
Exploded Assembly Reference
Replace with the real exploded-view image showing cartridge, vessel cover, pressure gauge, seals, clamps and support frame.
These dimensions are approximate reference readings from the 20-inch, three-cartridge example.
Custom fabrication is supported. The final approved production drawing controls all dimensions.
Typical Micron Pleated Filter Housing Applications
Multi-cartridge pleated housings provide fine filtration and polishing across major industrial processes.
Petrochemical
Fine filtration of compatible process liquids, oils and utility water.
Fine Chemicals
Particle removal from acids, alkalis, solvents, resins and specialty chemicals.
Pharmaceutical Chemicals
Process-liquid pre-filtration and polishing with appropriate sanitary configurations.
Electric Power
Condensate, cooling water, utility water and equipment-protection filtration.
Papermaking
Process water, coatings, additives and white-water filtration.
Water Treatment
RO pretreatment, industrial water, final polishing and wastewater reuse.
Automotive & Coatings
Paint, coating, pretreatment and circulation-liquid filtration.
Electronics
Compatible high-purity water and process-chemical filtration.
How to Select a Micron Pleated Filter Housing
The correct vessel and cartridge quantity depend on actual process conditions.
Define Filtration Duty
Provide liquid composition, particle size, solids loading, required micron rating and outlet quality.
Select Cartridge Type
Confirm cartridge material, length, outside diameter, end adapter and seal geometry.
Calculate Cartridge Quantity
Determine the number of cartridges from flow, clean pressure drop, viscosity and desired service life.
Confirm Housing Details
Select vessel material, pressure, temperature, connection, structure, finish, drain, vent and installation space.
Need a Custom Micron Pleated Filter Housing?
Send your cartridge model, quantity, flow, pressure, temperature, liquid and installation drawing.
Micron Pleated Filter Housing FAQ
Common questions before selecting an Incefiltration multi-cartridge housing.
How many cartridges can the housing hold?
The supplied product introduction states 1 to 200 cartridges, with customization supported.
What cartridge lengths are available?
The specification block lists 10, 20, 30, 40 and 50-inch filter cartridges.
What are the standard materials and operating limits?
The supplied sheet lists 304 and 316L stainless steel, 1.0 MPa design pressure and operating temperature up to 130°C.
What is the difference between Dome / Legs and Rocker structures?
The parameter table assigns Dome / Legs to smaller housings and Rocker to larger models. The final closure and support arrangement should be confirmed in the production drawing.
Can the internal cartridge plate be customized?
Yes. Cartridge quantity, hole pattern, support rods, adapter geometry, seal interface and cartridge length can be customized.
What information is needed for a quotation?
Provide cartridge model and dimensions, cartridge quantity, flow, micron rating, liquid, pressure, temperature, connection, material, seal, finish and installation drawing.
Request a Micron Pleated Filter Housing Quote
Complete the cartridge and process information below for an accurate engineering proposal.