3M Style High-Flow Housing
Adapter and internal plate configured for compatible 3M style high-flow cartridges.
MC-3M
Large-Flow Industrial Cartridge Filtration
High-Flow Filter Housing for 3M, Pall and Parker Style Cartridges
Incefiltration manufactures stainless steel high-flow filter housings for large-diameter pleated cartridges. The design supports 2 to 20 cartridges and can be manufactured vertically or horizontally according to available space. Positive cartridge sealing helps prevent bypass and leakage, while the large flow capacity of each cartridge reduces housing footprint and maintenance cost.
Verified Product Data
Cartridge AdaptersMC-3M / MC-PALL / MC-PARK
Cartridge Quantity2 to 20 elements
Design / Temperature1.0 MPa · Operating temperature up to 130°C
Reference Flow60 to 600 T/H
High-Flow Filter Housing Features
The following features are organized directly from the supplied Incefiltration product sheet.
2 to 20 Cartridge Design
Multiple element quantities support medium- and high-flow industrial filtration systems.
Large Flow, Small Footprint
Each high-flow cartridge provides a large filtration area and high liquid-handling capacity.
Vertical or Horizontal Layout
The equipment orientation can be selected according to installation space and maintenance access.
Multiple Cartridge Compatibility
Adapter designs are available for 3M, Pall and Parker style high-flow filter elements.
High Mechanical Strength
Reinforced stainless steel construction supports pressure resistance and stable operation.
Positive Cartridge Sealing
Positive sealing helps prevent liquid bypass and water leakage around the cartridge interface.
Lower Maintenance Cost
Durable cartridges, fewer elements and longer service intervals reduce change-out labor.
Chemical Compatibility
304 or 316L stainless steel and multiple gasket options support compatible corrosive applications.
Product Structure & Introduction
The vertical reference housing uses a davit arm, rocker handwheel, quick-open cover, reinforced vessel, side inlet, side outlet, sewage drain and widened support legs.
Rocker Handwheel & Thickened CoverSupports quick opening and reliable closure
Liquid InletSide-entry process connection
Thickened Cylinder Body304 or 316L stainless steel pressure vessel
Liquid / Sewage OutletFiltered-liquid outlet and lower drain connection
Verified Material & Configuration Data
Material304 stainless steel / 316L stainless steel
Design Pressure1.0 MPa
Operating TemperatureUp to 130°C
Surface FinishMechanical polishing / sandblasting
Entry TypeSide entry
Inlet / Outlet ConnectionTri-clamp / flange / thread
Seal GasketSilicone / Viton-FKM / PTFE / EPDM
Typical ApplicationsPetrochemical, fine chemical, pharmaceutical, electric power, papermaking, water treatment, automotive, mechanical processing, coatings, electronics and other industries
Quick-Open Cover
Lifting rings and davit hardware support cartridge inspection and replacement.
Internal Adapter Plate
Custom adapter plates positively locate and seal the selected high-flow cartridges.
Drainable Vessel
A lower sewage outlet supports draining, cleaning and maintenance.
High-Flow Housing by Cartridge Adapter
The specification area identifies three adapter families for common high-flow cartridges.
Pall Style High-Flow Housing
Custom internal interface for compatible Pall style high-flow filter elements.
MC-PALLParker Style High-Flow Housing
Adapter system configured for compatible Parker style high-flow cartridges.
MC-PARK
3M, Pall and Parker are trademarks of their respective owners. The names are used only
to describe cartridge-interface compatibility and do not imply affiliation or endorsement.
Cartridge Quantity & Length Options
The product sheet describes systems from two to twenty cartridges and lists 20, 40 and 60-inch element lengths.
2Cartridges
3Cartridges
4Cartridges
5Cartridges
6Cartridges
8Cartridges
10Cartridges
12Cartridges
14Cartridges
16Cartridges
18Cartridges
20Cartridges
20-Inch Cartridges
Compact high-flow cartridge option for lower vessel height and restricted installation spaces.
40-Inch Cartridges
Common process configuration balancing filtration area, vessel size and change-out handling.
60-Inch Cartridges
Maximum filtration area per element for high-flow systems and reduced cartridge quantity.
Construction Detail Images
Three positions are reserved for the internal adapter plate, lifting hardware and davit/pressure-gauge assembly shown in the supplied sheet.
Internal Cartridge Adapter Plate
Replace with a real top-view image showing positive cartridge seating and sealing interfaces.
Cover Lifting Rings & Fasteners
Replace with a close-up of the lifting rings, cover clamps and polished vessel finish.
Handwheel & Pressure Gauge
Replace with the davit handwheel, pressure gauge and upper piping assembly.
High-Flow Filter Housing Parameters
The following 3M-style reference models and values are taken from the supplied Incefiltration parameter table.
| Product Type | Device Model | Barrel Diameter | Inlet / Outlet | Reference Flow | Wall Thickness |
|---|---|---|---|---|---|
| 2-Cartridge | INCE-MC-3M-02 | Ø400 mm | DN80 Flange | 60 T/H | 3.0 mm |
| 3-Cartridge | INCE-MC-3M-03 | Ø400 mm | DN100 Flange | 90 T/H | 3.0 mm |
| 4-Cartridge | INCE-MC-3M-04 | Ø500 mm | DN125 Flange | 120 T/H | 3.0 mm |
| 5-Cartridge | INCE-MC-3M-05 | Ø550 mm | DN125 Flange | 150 T/H | 3.0 mm |
| 6-Cartridge | INCE-MC-3M-06 | Ø600 mm | DN150 Flange | 180 T/H | 3.0 mm |
| 8-Cartridge | INCE-MC-3M-08 | Ø700 mm | DN200 Flange | 240 T/H | 3.0 mm |
| 10-Cartridge | INCE-MC-3M-10 | Ø800 mm | DN200 Flange | 300 T/H | 3.0 mm |
| 12-Cartridge | INCE-MC-3M-12 | Ø900 mm | DN200 Flange | 360 T/H | 4.0 mm |
| 14-Cartridge | INCE-MC-3M-14 | Ø950 mm | DN200 Flange | 420 T/H | 4.0 mm |
| 16-Cartridge | INCE-MC-3M-16 | Ø1000 mm | DN200 Flange | 480 T/H | 4.0 mm |
| 18-Cartridge | INCE-MC-3M-18 | Ø1100 mm | DN200 Flange | 540 T/H | 4.0 mm |
| 20-Cartridge | INCE-MC-3M-20 | Ø1200 mm | DN200 Flange | 600 T/H | 4.0 mm |
The table uses a 3M-style cartridge interface as the reference example.
Reference flow is shown as T/H in the supplied sheet. Actual flow depends on liquid density,
viscosity, cartridge micron rating, cartridge length, contamination loading, clean pressure drop,
piping and operating conditions.
Materials, Connections & Seal Options
Configure the housing according to corrosion, temperature, installation and hygiene requirements.
Housing Materials
Select the stainless steel grade according to the process liquid.
304 Stainless Steel316L Stainless Steel
Cartridge Lengths
The specification table lists three high-flow cartridge lengths.
20 Inch40 Inch60 Inch
Pipe Connections
Available connection forms in the supplied introduction.
Tri-ClampFlangeThread
Seal Materials
Select the gasket according to chemical compatibility and operating temperature.
SiliconeViton / FKMPTFEEPDM
Dimension Reference Diagrams
The supplied drawing uses a vertical 3M-style 3-cartridge housing as an example. Final dimensions vary with cartridge quantity, length, orientation and connection.
Three-Cartridge Top View
The example shows three cartridge positions arranged inside the circular adapter plate with side connections and perimeter cover fasteners.
Side Elevation Reference
The supplied example indicates approximately 2061.5 mm overall height, 1250 mm cartridge/vessel reference height, 1000 mm inlet reference height, 470 mm support-leg section and 670.97 mm base width.
Front Elevation Reference
The front view shows a Ø450 mm reference barrel, upper cover mechanism, side process connection, lower drain and support-leg arrangement.
These dimensions are reference readings from the 3M-style 3-cartridge example.
Custom vertical and horizontal fabrication is supported. The final approved production drawing controls all dimensions.
Typical High-Flow Filter Housing Applications
High-flow cartridge housings reduce element count and footprint in large industrial liquid systems.
Petrochemical
Large-flow process liquid, oil, utility-water and compatible chemical filtration.
Fine Chemicals
High-area filtration of compatible acids, alkalis, solvents, resins and specialty chemicals.
Pharmaceutical Chemicals
High-flow pre-filtration using suitable stainless steel, finish and gasket selections.
Electric Power
Condensate, cooling water, utility water and equipment-protection filtration.
Papermaking
White water, process water, coatings and additive filtration.
Water Treatment
RO pretreatment, desalination, industrial water and wastewater-reuse filtration.
Automotive & Coatings
Paint, coating, pretreatment and circulation-liquid filtration.
Electronics
Compatible high-flow process water and process-chemical filtration.
How to Select a High-Flow Filter Housing
The correct element quantity and vessel design depend on actual process conditions.
Identify the Cartridge Interface
Confirm 3M, Pall, Parker or custom cartridge geometry, connection and seal arrangement.
Define Flow & Liquid Data
Provide flow, density, viscosity, temperature, solids content and chemical compatibility.
Select Quantity & Length
Choose 2–20 elements and 20, 40 or 60-inch cartridges according to required area and footprint.
Confirm Layout & Connections
Select vertical or horizontal design, flange size, drain, vent, lifting access and installation drawing.
Need a Custom High-Flow Filter Housing?
Send your cartridge model, flow rate, pressure, temperature, liquid, micron rating and installation drawing.
High-Flow Filter Housing FAQ
Common questions before selecting an Incefiltration high-flow cartridge housing.
Which high-flow cartridge styles are supported?
The specification identifies MC-3M, MC-PALL and MC-PARK adapter families for compatible 3M, Pall and Parker style cartridges.
How many cartridges can the housing hold?
The product description states two to twenty cartridges. The reference parameter table lists 2, 3, 4, 5, 6, 8, 10, 12, 14, 16, 18 and 20-cartridge models.
What cartridge lengths are available?
The supplied specification lists 20, 40 and 60-inch high-flow cartridges.
Can the housing be horizontal?
Yes. The product sheet states that the equipment can be vertical or horizontal according to available space.
What are the reference pressure and temperature?
The supplied sheet lists 1.0 MPa design pressure and operating temperature up to 130°C. Final design conditions require engineering confirmation.
Can the dimensions and adapter plate be customized?
Yes. Cartridge adapter, quantity, length, vessel diameter, wall thickness, orientation, connection, drain, support and lifting system can be customized after drawing approval.
Request a High-Flow Filter Housing Quote
Complete the cartridge and process information below for an accurate engineering proposal.